Sinbad Motor is an enterprise that develops and produces hollow cup products. It produces low-noise, high-quality reduction gearboxes, gearbox motors, reduction motors and other products. Among them, the reduction motor is familiar to most people. The reduction motor plays the role of matching speed and transmitting torque between the prime mover and the working machine or actuator. It is a relatively precise machine. However, due to the harsh working environment of the reduction motor, failures such as wear and leakage often occur.
In order to prevent the failure from occurring, we must first understand the usage techniques of the reduction motor.
1. Users should have reasonable rules and regulations for use and maintenance, and should carefully record the operation of the reduction motor and problems found during inspection. During work, when the oil temperature rises above 80°C or the oil pool temperature exceeds 100°C and an abnormality occurs, When normal noise and other phenomena occur, use should be stopped, the cause should be checked, the fault must be eliminated, and the lubricating oil can be replaced before continued operation.
2. When changing the oil, wait until the reduction motor cools down and there is no danger of burning, but it should still be kept warm, because after cooling, the viscosity of the oil increases, making it difficult to drain the oil. Note: Cut off the power supply to the driving device to prevent inadvertent power on.
3. After 200 to 300 hours of operation, the oil should be changed for the first time. The quality of the oil should be checked regularly in future use. Oil mixed with impurities or deteriorated must be replaced in time. Generally speaking, for geared motors that work continuously for a long time , replace new oil after 5,000 hours of operation or once a year. A geared motor that has been out of service for a long time should also be replaced with new oil before re-operation. The geared motor should be filled with the same oil as the original brand, and must not be mixed with oil of different brands. The same oils with different viscosities are allowed to be mixed.
Writer：Ziana
Post time: Apr-19-2024